Onduleurs Delta
Appareils Pris en Charge
| Device Type | Variants | Modbus TCP (Ethernet) | RS485 | Curtailment |
|---|---|---|---|---|
| Delta RPI | M6/M8/M10/M12/M15A/M20A/M30 | ❌ | ✅ | ✅ |
| H3/H5/H3A/H4A/H5A (non testés) | ||||
| M6A/M8A/M10A/M50A/M30A (non testés) |
Câblage
Le Sofar EMS et les onduleurs Delta communiquent via RS485.
RS485
| Paramètre | options |
|---|---|
| Vitesse de transmission (Baudrate) | 2400 / 4800 / 9600 / 19200 (par défaut) / 38400 |
| Bits de données | 8 |
| Parité | Aucune |
| Bits d'arrêt | 1 |
Configuration
Avertissement
NOTE: RS485 Device Addresses
- You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
- Use lower addresses first (1, 2, ...) because the Sofar EMS will find them faster!
- For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The Sofar EMS will scan on those first.
Last updated February 18, 2026Edit this page