AC•THOR / AC ELWA 2

---

1. Basic settings on the my-PV device

First read the installation and user manual supplied with the device, as well as the online manual.

• The user manual for AC•THOR can be found here
• The user manual for AC ELWA 2 can be found here
• Make sure the device is correctly installed and connected before proceeding.

---

2. Settings on the my-PV device

Configure the following parameters in the web interface or via my-PV Cloud:

These settings can be applied directly on the device, via the web interface, or through my-PV Cloud.

---

3. Network & communication

1. The AC•THOR or AC ELWA 2 devices are connected to Sofar EMS through your local network (router).
2. Within this network, the my-PV device receives commands indicating how much power it should deliver.

---

4. Settings on Sofar EMS

Perform the following steps in the web interface of Sofar EMS:

Step 1: Select the device type

You will be asked: "What kind of device do you want to add?"

Step 2: Select the manufacturer

Choose MYPV from the list of manufacturers.

Step 3: Select the model

You will be asked: "Which device model are you adding?"
Select the correct model, for example:

• AC Elwa 2
• Acthor
• Acthor 9s

Step 4 & 5: Network & communication

Sofar EMS will perform a network scan. In the "Device network parameters" screen, you can add the device:

• Option 1: Add by MAC address (recommended for networks with DHCP)
• Option 2: Add by fixed IP address, domain, or hostname

Step 6: Configure the device settings

In the "Device/group settings" screen, configure the specific settings for the my-PV device.

Don’t forget to click the Save button at the bottom of the page.

---