Acuvim IIR Energiemeters
Ondersteunde Apparaten
| Device Type | Modbus TCP (Ethernet) | RS485 |
|---|---|---|
| Acuvim IIR Energy Meter | ✅ | ✅ |
| Acuvim 3 Energy Meter |
Verbinding
Ethernet
Voor correcte ethernetbekabeling: Volg de richtlijnen voor ethernetbekabeling.
Als u een accuenergy energiemeter heeft, zou u een interface moeten hebben om deze te beheren. Ga in deze interface naar de Instellingen pagina, selecteer dan het Communicatie menu.
Scroll vervolgens naar beneden totdat u deze velden vindt:
Waarschuwing
Waarschuwing
Zorg ervoor dat de poort is ingesteld op 502 en dat de Snelle Leesmodus is ingeschakeld en ingesteld op 100ms Snelle Lees.
RS485
Info
RS485 Wiring
- For correct RS485 wiring: Follow the guidelines for RS485 wiring.
- If the wiring shown in the table below is incorrect, please let us know.
- There is no general consensus in the industry about the usage of A and B for the RS485 polarity, so it may be counterintuitive and opposite of what you might expect for some devices.
| Device | Sofar EMS model OM1 | Sofar EMS model IG8 | RS485-USB converter | RS485-Ethernet converter |
|---|---|---|---|---|
| RS485 A | RS485_POS | RS485 A | TX+ | |
| RS485 B | RS485_NEG | RS485 B | TX- | |
| RS GND | GND | Not available | G |
Waarschuwing
NOTE: RS485 Device Addresses
- You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
- Use lower addresses first (1, 2, ...) because the Sofar EMS will find them faster!
- For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The Sofar EMS will scan on those first.