In beta and available on request. The additions in this overview require the matching integration or controller update and are not confirmed as part of the standard customer release. Request them through your existing Eniris support conversation. The status applies to these additions, not to every existing function of the devices listed elsewhere on this page.
| Model / system | Beta addition | Validation and conditions |
|---|---|---|
| ACE RESS-3A-H2-8K | RS485 monitoring and prepared battery-power requests | Physical validation pending; no confirmed communication watchdog |
| Model / system | Beta addition | Validation and conditions |
|---|---|---|
| SOSEN / ACE, earlier storage mapping | Separate storage implementation candidate | Technical assessment and exact protocol matching required |
See integration details for connection requirements and operating limitations.
A custom RS485 integration is prepared for the RESS-3A-H2-8K. It includes inverter, PV, battery and grid measurements and external battery-power requests. Its residential measurement scaling differs from the 60 kW protocol document. The command unit changes with the reported protocol version and must be checked on the installed device.
Physical validation remains pending. No communication watchdog is documented for this command path, so the last request remains active until an explicit release. Unconfirmed fault-bit definitions are not presented as decoded alarms.
An earlier implemented candidate remains available for technical assessment on request. Its earlier review was closed; Eniris must review and prepare the appropriate version before installation. It is not a ready-to-install standard release. An earlier SOSEN/ACE storage implementation also exists. Match it to the actual inverter and protocol revision; it must not be assumed identical to the RESS-3A-H2-8K custom variant.